Problem Solving
Problems relating to images
No images appear
Check
Did you press the [t] button?
Are the indicators switched off?
Is Shutter active?
Are the configuration menu settings correct?
Is the projected image completely black?
Only when projecting computer images
Is the image signal format setting correct?
Only when projecting images from a video source
Moving images are not displayed
Check
Is the computer's image signal being output to the LCD and
the monitor?
Only when projecting images from a laptop computer
or a computer with a built-in LCD screen
Press the [t] button to turn the power on.
The power cable is not connected correctly or power is not being supplied normally.
Connect the projector's power cable correctly.
Check that your electrical outlet or power source is functioning correctly.
Press the [Shutter] button on the Remote Control to cancel Shutter. s
Reset All of the settings. s Reset Menu - Reset All
Some input images, such as screen savers, may be completely black.
Change the setting according to the signal for the connected equipment. s Signal Menu - Video
Signal
p.69
Change the image signal to external output only. For more information, check your computer's
documentation.
Remedy
p.46
p.95
Remedy
108