Epson PowerLite Pro Z8000WUNL User Manual page 18

Part Names and Functions
Name
12 [Aspect] button The Aspect Ratio changes each time the button is
pressed.
13 [Lens Shift] button Press to adjust the lens shift.
14 [ID] button Press to set the remote control ID.
15 [Help] button Displays and closes the Help screen which shows
you how to deal with problems if they occur.
16 Remote port Connects the optional remote control cable set
and outputs signals from the remote control.
When the remote control cable is plugged into
this remote port, the remote receiver is disabled.
17 [Zoom] button Press to adjust the zoom.
18 [Num] button Use this button to enter passwords, IP address
from the Network, and so on.
19 [Focus] button Press to adjust the focus.
20 Numeric buttons Use this button to enter passwords, remote
control IP settings, IP address from the Network,
and so on.
21 [Color Mode] button Each time the button is pressed, the Color Mode
changes.
22 [Freeze] button Images are paused or unpaused.
23 [E-Zoom] buttons The [z] button enlarges the image without
[z][x] changing the projection size.
The [x] button reduces the parts of images that
have been enlarged using the [z] button.
24 [Pointer] button Press to activate the on screen pointer.
Function Name
25 [Esc] button Stops the current function. If pressed when the
configuration menu is displayed, it moves to the
previous menu level.
Acts as a mouse's right button when using the
optional wireless mouse receiver.
26 [User] button Press to assign a frequently used item from the six
available configuration menu items. By pressing
the button the assigned menu item
selection/adjustment screen is displayed, allowing
you to make one-touch settings/adjustments.
Test Pattern is assigned as the default setting.
27 [LAN] button Changes to images from EasyMP Network
Projection (PowerLite Pro Z8050WNL only). This
button does not function on the PowerLite Pro
Z8000WUNL.
28 ID switch Use this switch to enable (On)/disable (Off) ID
settings for the remote control.
29 [DVI-D/HDMI] Each time you press this button, the image on the
button screen changes between the DVI-D and HDMI
input ports.
30 [Search] button Changes to the next input source that is
connected to the projector and is sending an
image.
31 Indicators A light is emitted when outputting remote control
signals.
32 Remote control Outputs remote control signals.
light-emitting area
18
Function