Epson PowerLite Pro Z8000WUNL User Manual page 145

Reading Problem Mail Notification Function
The details of the problem are listed line by line. The following table
shows the details that are given in the message for each item. To deal with
problems/warnings, see "Reading the Indicators" s
Message
Auto Iris Error
Cinema filter error
Cinema Filter Warning
Clean Air Filter
Fan related error
High-speed cooling in progress
Internal error
Internal temperature error
Lamp out
Lamp replacement notification (1)
Lamp replacement notification (2)
Lamp timer failure
Lamp Warning (1)
Lamp Warning (2)
Low Air Flow
Low Air Flow Error
No Air Filter
p.102
Cause
Auto Iris Error
Cinema filter error
Cinema Filter Warning
The projector can still be used but the
cinema filter does not work.
Air Filter Notice
Fan Error
High Temp Warning
Internal Error
High Temp Error
(Overheating)
Lamp Error (both lamps 1/2)
Replace Lamp
(1) Indicates lamp 1, and (2) indicates
lamp 2. The indicated lamp is due for
replacement.
Lamp Failure (both lamp 1/2)
Lamp Warning
(1) indicates lamp 1, and (2) indicates
lamp 2. The indicated lamp is out.
Low Air Flow
Filter Airflow Error
No Air Filter/Air Flow Sensor Err.
Message
No-signal
Peltier Device error
Power Err. (Ballast)
Power Warning. (Ballast) (1)
Power Warning. (Ballast) (2)
Pump Error
Sensor error
Shutter Error
Shutter Warning
A (+) or (-) appears at the start of the message.
(+): A projector problem has occurred
(-): A projector problem has been dealt with
Cause
No Signal
No Signal is input to the projector.
Check the connection status or check
that the power for the signal source is
turned on.
Cooling system error (Peltier element)
Power Err. (Ballast)
Supply System Warning (Ballast)
(1) indicates the lamp 1, and (2)
indicates the lamp 2. The informed
lamp is out.
Cooling system error (pump)
Sensor Error
Shutter Error
Shutter Warning
Though this unit still can be used, the
electric shutter does not work.
145