Part Names And Functions; Front/Top - Epson PowerLite Pro Z8000WUNL User Manual

Part Names and Functions

Part Names and Functions

Front/Top

The illustration shows the projector with a standard zoom lens (not
included) installed.
Name
1 Handle Use these handles when carrying the projector.
Also, you can pass an theft deterrent wire lock
through the handles to secure the projector.
Warning:
Do not carry the projector by yourself.
Two people are needed to unpack or carry the
projector.
2 Security slot( ) The Security slot is compatible with the Microsaver
Security System manufactured by Kensington®.
3 Air intake vent Takes in air to cool the projector internally. If dust
(Air filter) collects here it can cause the internal temperature
to rise, and this can lead to problems with
operation and shorten the optical engine's service
life. Be sure to clean the Air filter regularly.
4 Front adjustable When set up on a desk, turn to extend and retract
foot to adjust the horizontal tilt.
The front adjustable feet can be removed when
the projector is mounted on the ceiling.
5 Front cover Remove this cover to remove or install the lens
unit when replacing the lens.
This cover must be installed when using the
projector.
6 Remote Receiver Receives signals from the remote control.
7 Interface cover Remove this cover to connect cables to the ports
inside when connecting the projector to video
equipment.
8 Projection lens Images are projected through here.
9 Interface cover Opens and closes the interface cover.
open/close switch
12
Function