Icom IC-V3MR Instruction Manual page 7

1
ACCESSORIES
Supplied accessories
Battery pack Battery charger
(BP-298)
Power adapter
(BC-242)
NOTE: Some accessories may not be supplied, or
the shape may differ, depending on the transceiver
version�
Belt clip
(BC-240) (MB-124)
Jack cover
(with screws)
Flexible antenna
(FA-SC28V)
Belt clip
Attaching:
1� Remove the battery pack from the transceiver if it
is attached�
2� Slide the belt clip in the direction of the arrow until
the belt clip is locked and makes a 'click' sound�
Detaching:
z Lift the tab up (1), and slide the belt clip in the
direction of the arrow (2)�
1
Tab
BE CAREFUL! DO NOT break your fingernail�
Flexible antenna
Connect the antenna to the antenna connector�
CAUTION:
• DO NOT carry the transceiver by holding only the
antenna�
• DO NOT connect an antenna other than the
specified antenna�
• DO NOT transmit without an antenna�
1-2
Belt clip
Battery pack
2