Function And Control; Remote Controller Introduction - Gree GWH18AAC-K3NNA1A Service Manual

6. Function and Control

6.1 Remote Controller Introduction

Buttons on Remote Controller
Icon Display on Remote Controller
Operation mode
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
Operation introduction of remote controller
This is a general use remote controller, it could be used for the air conditioners with multifunction; For some function, which the
model doesn't have, if press the corresponding button on the remote controller that the unit will keep the original running status.
This is a general use remote controller, it could be used for the air conditioners with multifunction; For some function, which
the model doesn't have, if press the corresponding button on the remote controller that the unit will keep the original running status.
After putting through the power, the air conditioner will give out a sound.Operation indictor "
you can operate the air conditioner by using remote controller.
Under on status, pressing the button on the remote controller, the signal icon "
blink once and the air conditioner will give out a "de" sound, which means the signal has been sent to the air conditioner.
Under off status, set temperature and clock icon will be displayed on the display of remote controller (If timer on, timer off and
light functions are set, the corresponding icons will be displayed on the display of remote controller at the same time); Under on
status, the display will show the corresponding set function icons.
12
1
3
6
8
10
11
:Set temp.
:Outdoor ambient temp.
Turbo mode
Set fan speed
2
4
5
7
9
12
Temp. display type
:Indoor ambient temp.
Send signal
Child lock
health function
ventilation operation
8
Set temperature
Light function
I feel function
Set time
TIMER ON /TIMER OFF
Up & down swing
1 On/Off button
2 Mode button
3
Fan button
4 ▲/ button
5
Swing button
6
Sleep button
7 Temp button
8
Turbo button
9
I Feel button
10 Timer button
11
X-Fan button
12
Light button
heating function
Sleep mode
X-fan mode
" is ON (red indicator). After that,
"on the display of remote controller will
Service Manual
Technical Information