Steps
7. Remove axial flow blade
Remove the nut on the blade and then remove the
axial flow blade.
8. Remove motor and motor support
Remove the 4 tapping screws fixing the motor and
disconnect the leading wire insert of the motor.
Then remove the motor.
Remove the 2 tapping screws fixing the motor
support and lift the motor support to remove it.
9. Remove electric box
Remove screws fixing the electric box subassembly;
loosen the wire bundle and unplug the wiring
terminals. Then lift the electric box to remove it.
54
axial flow blade
motor support
motor
Service Manual
electric box
Installation and Maintenance