Lexmark MS617 User Manual page 142

Understanding the printer menus
Use
1
Show Bookmarks
Yes
No
Web Page Refresh Rate
30–300
1
Contact Name
1
Location
1
Alarms
Alarm Control
Cartridge Alarm
Timeouts
1
Standby Mode
Disabled
1–240
Timeouts
Sleep Mode
Disabled
1–120
Timeouts
Print with Display Off
Allow printing with display off
Display on when printing
1
This menu item appears only in touch‑screen printer models.
2
This menu item appears only in non‑touch‑screen printer models.
1
To
Specify whether to display Bookmarks from the Held Jobs
area.
Note: Yes is the factory default setting.
Specify the number of seconds between Embedded Web
Server refreshes.
Note: 120 is the factory default setting.
Specify a contact name for the printer.
Note: The contact name is stored on the Embedded Web
Server.
Specify the printer location.
Note: The location is stored on the Embedded Web Server.
Set an alarm when the printer requires user intervention.
Select from the following options:
Off
Single
Continuous
Notes:
•
Single is the factory default setting for Alarm Control.
•
Off is the factory default setting for Cartridge Alarm.
Set the duration of idle time before the printer enters a lower
power state.
Note: 15 minutes is the factory default setting.
Set the idle time before the printer begins operating in Sleep
Mode.
Notes:
•
20 minutes is the factory default setting.
•
Disabled appears only when Energy Conserve is set to
Off.
•
Lower settings conserve more energy, but may require
longer warm‑up times.
Print a job with the display turned off.
Note: Display on when printing is the factory default setting.
142