Lexmark MS617 User Manual page 125

Hide thumbs Also See for MS617:
Table of Contents

Advertisement

Understanding the printer menus
Use
Standard Network Setup OR
Network [x] Setup
Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
Reports menu
To access the menu, navigate to any of the following:
Network/Ports menu > Networks/Ports > Standard Network > Standard Network Setup > Reports
Network/Ports menu > Networks/Ports > Network [x] > Network [x] Setup > Reports
Use
To
Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP
address.
Network Card menu
Use
View Card Status
Connected
Disconnected
View Card Speed
Network Address
UAA
LAA
Job Timeout
0–255 seconds
Banner Page
Off
On
To
Show and set the printer network settings.
Note: The Wireless menu appears only when the printer is connected to a
wireless network.
To
View the connection status of the network card.
View the speed of an active network card.
View the network addresses.
Set the amount of time it takes for a network print job to be canceled.
Notes:
90 seconds is the factory default setting.
A setting value of 0 disables the timeout.
If a value of 1–9 is selected, then the setting is saved as 10.
Enable banner pages.
Note: Off is the factory default setting
125

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms517Ms610Ms510Ms510dnMs517dnMs610dn ... Show all

Table of Contents