Hardware Iso Contents; Hardware Iso Configuration Settings - Dell EMC VxFlex Ready Node 13G Manual

Reference material
Configuration settings
Hardware Configuration and Operating System Installation Guide - Windows Servers
78
Table 9 Hardware ISO contents
Description
Drivers for OS Deployment Application
Expander Backplane Firmware
PowerEdge Server BIOS
Backplane Firmware
SAS HBA330 Storage Controller Firmware
PERC H330 Storage Controller Firmware
PERC H730 Storage Controller Firmware
Intel x520/i350 NIC Firmware
iDRAC with Lifecycle Controller Firmware
Note
Some of the firmware listed in the table is dependent on the VxFlex Ready Node
hardware configuration. The Hardware ISO attempts to apply all firmware updates,
but only those updates that are compatible will be installed.
Applying settings using RACADM
The individual firmware files are also available on the
easily be installed using the following remote RACADM command:
racadm -r <dracIP> -u root -p calvin update –f <filename.exe>
Where:
<dracIP> is the iDRAC IP address
l
<filename.exe> is the name of the Dell Windows update packages
l
Note
The default password is calvin.
The Hardware ISO runs a script that automatically configures the BIOS and iDRAC
settings listed in the table below. Some settings are dependent on the server model.
Table 10 Hardware ISO configuration settings
Description
Server BIOS Boot Sequence
Hard Disk Boot Order
Version
16.03.00 A00
3.03 A00
2.2.5
2.23 A00
13.17.03.00 A01
25.4.0.0017 A04
25.4.0.0017 A06
17.0.12 A00
2.40.40.40 A00
Dell Support
Setting
BIOS.BiosBootSettings.BootS
eq
BIOS.BiosBootSettings.HddS
eq
website, and can
Value
HardDisk.List.1-1
Disk.SATAEmbedded.J-1,RAI
D.Integrated.1-1
or