Hardware Iso Configuration Settings - Dell EMC VxFlex Ready Node Operating System Installation Manual

Note: The default password is Scaleio123.
Configuration settings
The Hardware ISO runs a script that automatically configures the BIOS and iDRAC settings listed in the table below.
Some settings are dependent on the server model.
Table 19 Hardware ISO configuration settings
Description
Server BIOS Boot Sequence
Hard Disk Boot Order
Server Boot Mode
SRIOV Global Enablement
Memory Performance Tuning
System Change Tracking
CPU Virtualization Features
CPU Cores
CPU X2APIC Mode
CPU Turbo Engagement
System Power Profile
OS to iDRAC Pass-through Mode
OS to iDRAC Enablement
iDRAC DHCP Enablement
iDRAC Default Credentials
iDRAC IPMI Enablement
iDRAC Alert Enablement
iDRAC IPv6 Enablement
Applying settings using RACADM
The individual settings can also be applied using the remote RACADM command:
racadm -r <dracIP> -u root -p <password> set <setting> <value>
Where:
<dracIP> is the iDRAC IP address
l
Setting
BIOS.BiosBootSettings.BootSeq
BIOS.BiosBootSettings.HddSeq
BIOS.BiosBootSettings.BootMode
BIOS.IntegratedDevices.SriovGlobalEnabl
e
BIOS.MemSettings.SnoopMode
BIOS.MiscSettings.InSystemCharacteriza
tion
BIOS.ProcSettings.ProcVirtualization
BIOS.ProcSettings.ProcCores
BIOS.ProcSettings.ProcX2Apic
BIOS.ProcSettings.ControlledTurbo
BIOS.SysProfileSettings.SysProfile
iDRAC.OS-BMC.PTMode
iDRAC.OS-BMC.AdminState
iDRAC.IPv4.DHCPEnable
iDRAC.Tuning.DefaultCredentialWarning
iDRAC.IPMILan.Enable
iDRAC.IPMILan.AlertEnable
iDRAC.IPv6.Enable
VxFlex Ready Node Operating System Installation Guide for ESXi
Value
HardDisk.List.1-1
Disk.SATAEmbedded.J-1,RAID.Integrated.
1-1
or
Disk.SATAEmbedded.D-1,RAID.Integrated
.1-1
Bios
Enabled
EarlySnoop
Disabled
Enabled
All
Enabled
Disabled
PerfOptimized
usb-p2p
Enabled
Disabled
Disabled
Enabled
Enabled
Enabled
Reference material
67