Additional Configurations
Additional actions after installing DAS Cache
Hardware Configuration and Operating System Installation Guide - Windows Servers
66
Results
You can use the DAS Cache utility, either from the console or via RDP.
To run fiocli:
Open a command line window with administrator's privileges and switch to the C:
l
\Program Files\SanDisk DAS Cache directory.
or
Open a command line window through Windows Explorer:
l
1. In Windows Explorer, open the C:\Program Files\SanDisk DAS Cache
directory.
2. Press Shift and right-click in the directory, then select Open command
window here.
Run the fiocli commands in the following format: fiocli <command>.
For example, to view help, run fiocli h.
You are required to perform these additional actions after installing DAS Cache:
Procedure
1. Log in to the node.
2. Check for a partition on the SSD disk that you want to allocate for DAS Cache:
a. From the Windows Start menu, open Disk Management.
The Disk Management window appears: