Operation - Blizzard POWER PLOW 810-1 Installation Instructions & Owner's Manual

Your POWER PLOW™ snowplow is the most
advanced and versatile snowplow on the market. The
easy-to-use controls allow you to automatically adjust
the snowplow blade and wings into an infi nite number
of plowing positions. Review the illustrations below to
determine the best position for your plowing needs.
A.
B.
C.
D.
Lit. No. 68251, Rev. 09

OPERATION

A. Compact Position
(8' or 8'6" Blade Width)
• Primary position when transporting the
snowplow
• For use in heavy snow conditions with poor
visibility, initial clearing and tight quarters
• Ideal application: residential driveways, small
roads
B. WIDE PASS™ Position
(10' or 11'3" Blade Width)
• Primary position for clearing large surfaces
• For use in light snow conditions with good
visibility, fi nal clearing and clean-up
• Ideal application: large parking lots, widening
roadways
C. BUCKET BLADE™ Position
(9'3" or 9'10" Blade Width)
• Primary position for transporting snow
• For use in initial clearing with decent visibility,
transporting large volumes of snow, fi nal
clean-up
• Ideal application: roadway intersections
D. WIDE PASS Position Angled with Wing
Forward
• Primary position for accelerated angled plowing
• For use in directional plowing, cornering,
diverting snow away from objects or buildings
• Ideal application: plowing adjacent to buildings,
driveway/road intersections
Always transport POWER PLOW snowplow
with both wings fully retracted.
NOTE: To prevent premature failure of the power
contactor (solenoid), return the joystick to its
neutral (center) position, or release the touchpad
button, immediately after the blade reaches
the limit of any position. Continuing to hold the
control after the blade has reached the limit of
movement in any position will reduce the life of
the solenoid.
8
CAUTION
May 1, 2021