Advertisement
Electronic pellet burner controller - NPBC-V3M
Programming mode for intervals of the day when boiler's work is allowed ( Programme ):
If you decide that there is no need for the boiler to work twenty four hours, you can use the options for
limitation of the work time in this mode. By choosing the Programme mode a screen with time
intervals appears:
After confirming your choice by pressing the F button, a screen for choosing the external installation
appears. It is the same as in Auto mode. While working in this mode, on the upper left side of the
screen appears the time of the next operation which would be turning on (On) or turning off (Off) the
burner:
Programme mode
At 22:00h the burner
turns off
Turning off the controller :
To turn off the controller press F and choose Standby. The screen will take the following view:
Work mode of the heated
external installation
After that an extinguishing the fire and cleaning the burner procedures start automatically.
The complete extinguishing the fire and cleaning the burner takes time. It is normal if the burner's and
the boiler's aggregates continue working after selecting this mode.
The circulation pumps could work if the condition for them to be on are implemented even if the
burner is off. This allows the rest of the heat energy of the water in the boiler to be used.
User Manual / version 2.6
http://www.naturela-bg.com/en/
page 9 of 27
Advertisement
