Advertisement
Main screen has the following view:
Heating installation
Work mode
Feed screw motor
Air fan
Additional information
Press the F button to switch the work mode or to turn off the burner:
▲
By pressing "
" or "
are going to select. The following pressing the F button switches to the selected mode.
Work modes:
Standby – Turn off the burner. If it was working by the moment of switching to this mode, the
fire will be automatically extinguished. In the work mode field will be shown „Standby".
Auto – Automatic mode. By selecting this mode the burner automatically starts and during the
work process keeps the set temperature. In the work mode field will be shown „Auto".
Programme – This mode has additional programming periods of the day when boiler's work is
allowed. In this mode the burner starts and regulates the set temperature only during the time
intervals allowed by the timer. In the work mode field appears a timer
next turning on or off, depending which is next. For example
is coming next at 22:00h .
If the clock is not set (its indication blinks) then pressing the F button switches to the time setting
screen (Set Time) instead of mode menu.
User Manual / version 2.6
Electronic pellet burner controller - NPBC-V3M
E
XPLOITATION INSTRUCTIONS
Check sign
▼
" buttons, move up or down the check sign „", which indicates the mode you
http://www.naturela-bg.com/en/
Internal screw motor
Work phase
Boiler temperature
Flame indicator
Clock
and the time of the
means a turning off
page 6 of 27
Advertisement
