Advertisement
The following pressing the Enter button forwards to the first screen with factory settings. Browse the
menus by pressing the arrow buttons:
you want to change the parameters in the currently displayed menu, press the Enter button again. In
the upper right corner of the screen appears the sign
In this mode the buttons have the following functions:
the arrow buttons
•
direction;
the Enter button switches to the next editable parameter;
•
the F button saves the changes in the current menu and exits the Edit mode;
•
if no buttons are pressed for a certain time, the controller goes back to its main screen without
•
saving the settings in the currently displayed menu.
To exit the factory settings press F and confirm your choice with Enter:
Factory settings are as follows:
Cleaning on Start – set the work time for the main (Fan) and the additional (Cleaner) air fan for
the cleaning cycle before ignition
Cleaning on Stop – set the work time for the main (Fan) and the additional (Cleaner) air fan for the
User Manual / version 2.6
Electronic pellet burner controller - NPBC-V3M
▲
forwards to the next menu and
▲
▼
or
change the value of the currently blinking parameter in the relevant
http://www.naturela-bg.com/en/
▼
, which indicates the Edit mode:
Sign for Edit mode
returns to the previous. If
page 15 of 27
Advertisement
