Table of Contents
Advertisement
6. Monitoring and Configuring the Printer
Item
Waste Toner Bottle
Intermediate Transfer
Unit
Fusing Unit
Transfer Roller
Paper Tray
Item
Tray 1
Tray 2
Bypass Tray
• The information about tray 2 appears only when the optional paper feed unit is installed.
• If non-genuine print cartridges are installed, toner life cannot be reliably indicated.
• For details about the printer's location and contact information, see p.91 "Configuring the SNMP
Settings".
• For details about the printer's host name, see p.89 "Configuring the DNS Settings".
Checking the Counter Information
Click the [Counter] tab on the main page to check the counter information.
76
Shows the remaining life of the waste toner bottle, as "Status OK", "Almost
Full" or "Full".
Shows the remaining life of the transfer unit, as "Status OK", "Replacement
Required Soon" or "Replacement Required".
For replacing, contact your sales or service representative.
Shows the remaining life of the fusing unit, as "Status OK", "Replacement
Required Soon" or "Replacement Required".
For replacing, contact your sales or service representative.
Shows the remaining life of the transfer belt, as "Status OK", "Replacement
Required Soon" or "Replacement Required".
For replacing, contact your sales or service representative.
Shows the current state and paper size/type setting of tray 1.
Shows the current state and paper size/type setting of tray 2.
Shows the current state and paper size/type setting of the bypass tray.
Description
Description
Advertisement
Table of Contents
