Table of Contents
Advertisement
LCD Contrast Adjustment
6
LCD Contrast Adjustment
The LCD contrast can be adjusted via the touch screen using the system menu
command F4, and performing the following steps:
1. Touch the upper-left and lower-right corners of the screen.
2. Follow the route on the screen.
3. Touch the square on the center of the screen to complete the task.
See also section
7.2 System
Menu.
The contrast can also be adjusted using the potentiometer on the back of the
operator terminal.
Use a small screwdriver to turn the potentiometer (clockwise = contrast down;
counter-clockwise = contrast up).
16
ABB, 1SBC159103M0201
Advertisement
Table of Contents
