Projector Status Lights; Using The Remote Control - Epson PowerLite 503c User Manual

EPSON PowerLite 503c/713c Projector

Projector Status Lights

The lights on top of the projector indicate the projector's
status and let you know when a problem occurs.
Light Status Description and action
orange The projector is in sleep mode. You can
unplug it to turn it off or press the Power
button to turn it on.
flashing The projector is warming up. Wait for the
green image to appear.
green The projector is operating normally.
flashing The projector is cooling down. You can't
orange turn the projector on (and should not
unplug it) until the light stops flashing and
remains orange.
red Power is cut off because of an internal
problem. Remove the power cord and
contact EPSON for help.
flashing The lamp is almost burned out. This is a
orange good time to replace it, following the
instructions on page 8.
red The lamp is burned out. Replace it as
described on page 8.
flashing There is a problem with the lamp, power
red supply, fuse, or circuit. If necessary, replace
the lamp as described on page 8.
flashing The projector is too hot. Make sure the
orange temperature surrounding the projector does
not exceed 104 F and there is plenty of
space around and under the projector for
ventilation. Clean the air filter if necessary.
See page 8 for instructions.
red The projector is overheating, which turns off
the lamp automatically. Let it cool for a few
minutes, then turn it back on. Make sure
there is plenty of space around and under
the projector for ventilation. If it continues
to overheat, you may need to change the air
filter. See page 8 for instructions.
flashing There is a problem with the cooling fan or
red temperature sensor. Turn off the projector
and unplug it. Contact EPSON for help.
6 EPSON PowerLite 503c/713c Projector
-

Using the Remote Control

The remote control lets you access all of your projector's
features from anywhere in the room (up to 30 feet away). You
can use it to turn the projector on and off, zoom the image,
and highlight your presentation, for example.
power light
lamp light
temperature
A/V Mute
light
highlighting
effects buttons
Open the cover just below the
remote control functions:
S-Video
Picture in Picture
9/01
IR output
Power
Freeze
Freeze
A/V Mute
E-Zoom
R/C ON
E-Zoom
3
Enter
light
Esc
Esc
Enter
Esc
Menu Help
Menu
Comp EasyMP
Comp
S-Video Video
Auto Resize
Auto
P in P
- Volume +
Volume
Power (projector)
remote control
OFF
on/off
Enter
Esc
button to access these
Help
Video
Resize