Using The Buttons - Epson PowerLite 503c User Manual

This table summarizes the functions on the remote control.
Button Function
Power Starts or stops the projector.
Freeze Keeps the current computer or video image on the
screen.
A/V mute Turns off the audio and video, displaying the black,
blue, or user logo background. Press again to turn it
back on.
E-Zoom Enlarges or reduces the image size from 1x to 4x (in
12 steps). Pressing the right side of the button
enlarges the image, pressing the left side of the
button reduces the image. To display a portion of
an enlarged image which is outside the display
area, press the Enter button and scroll the image to
the desired location.
R/C ON/OFF Turns the remote control on or off.
Button 1 Places a pointer or cursor stamp on the screen.
Button 2 Draws a box highlight.
Button 3 Draws a horizontal or vertical bar.
Button 4 Draws a freehand line.
Button 5 Erases highlighting effects.
Enter Use the Enter button to navigate in menus or to use
(pointer the remote as a mouse pointer when the projector
button) is connected to a computer with the mouse cable.
The Enter button acts as a mouse left-click.
Light Illuminates all buttons on the remote control.
Esc Stops the current function. Pressing Esc while
viewing a menu displays the previous menu. When
the image source is Computer, the Esc button acts
as a mouse right-click.
Menu Displays or hides the menu.
Help Displays the online help menu.
Comp Switches to Computer image.
S-Video Switches to S-video image.
Video Switches to standard composite video source.
Auto Optimizes the computer image.
Resize Switches the display dot mode and resize mode for
VGA, UXGA, SVGA, and SXGA input. Switches the
aspect ratio between 4:3 and 16:9 when video
images are being projected.
P in P Displays a video or S-video image in a subscreen
on the main display. Use the Enter button to
reposition the Picture in Picture (P in P) screen, or
the E-Zoom button to enlarge or reduce the image.
Changes made to the P in P screen location and size
are automatically carried over to the next P in P
session.
– Volume + Adjusts the volume.
EPSON PowerLite 503c/713c Projector
The projector might not respond to remote control
Note:
commands in these conditions: the remote control ON/OFF
switch is in the OFF position; batteries are weak; ambient light is
too bright; a certain type of fluorescent light is present; a strong
light source (such as direct sunlight) shines into the infrared
receiver; or other equipment emitting infrared energy is present
(such as a radiant room heater). Correct these conditions to use
the remote control.

Using the Buttons

Power
The following table summarizes the functions of the buttons
on top of the projector.
Button Function
Power Starts or stops projection.
Help Displays the online help menu.
Source Switches between Computer, Video, and S-video
sources.
Enter Selects a menu option when the Help menu is
displayed.
– Keystone + Adjusts a trapezoid distorted image to normal,
correction up to a ±15° tilt.
Select Scrolls through options when the Help menu is
displayed.
9/01 EPSON PowerLite 503c/713c Projector
Help
7
-