Type Designation; Accessories - ELGO Electronic GMIX2 Series Operating Manual

9 Type Designation

GMIX2
Series/Type:
Version:
000 = standard version
001 = 1. special version etc.
Signal Cable Length:
01.5 = 1.5 m standard length
(others on request)
NOTE
When ordering, please use the here described ordering code (Type Designation). Options
that are not required are filled in with „-„.
9.1

Accessories

Table 4: Accessories
Order Designation Description
MB20-50-10-1-R Magnetic tape with 5 mm pole pitch (please indicate length in XX.X m)
10 mm end cap set 2 end caps (10 mm) for magnetic tape. Two M3 screws included. Additional fixation in
the radial and linear range to protect the ends of the magnetic tape.
FS1000, FS1500 Guide rail for magnetic tape (length: 1.0 m, 1.5 m and max. 2.0 m available).
or FS2000 For longer measuring lengths the rails can be lined up together.
AP-00-XX** Aluminium cover-profile for magnetic tapes (as alternative to the cover tape).
**) AP-00-1m = 1m long / AP-00-2m = 2 m long
MR2012 Magnet ring (Ø o = 19,75 mm / Ø i = 14.7 mm, w = 4.1 mm, 12 poles, IF = 2)
MR3824 Magnet ring (Ø o = 38 mm / Ø i = 30 mm, w = 6,5 mm, 24 poles, IF = 200)
MR7244 Magnet ring (Ø o = 72 mm / Ø i = 54 mm, w = 7 mm, 44 poles, IF = 500)
POSU Pole finder card 85 x 55 mm
- 000 - XX.X
- 20 -
Type Designation