Description
The FRM Series gives you the option to choose from the most popular fiber cabling
connectors. The FRM220-10/100 provides you with ST, SC or FC connectors for your fiber optic
cables and RJ-45 port for 10/100Base-TX twisted pair cable connection. The factory default
settings of Ethernet auto-negotiation may be modified by adjustment of external DIP
switches to force Full/Half 10/100 or LFP function settings. The FRM220-10/100 gives you the
freedom to extend your 10/100Mbps cabling distance by allowing connectivity up to 120
kilometers over fiber. Six LED indicators signal the power status of the converter, UTP port
speed, Link/Act, duplex status and FX port ink/Act
and FEF (Far End Fault).
Features
■
10/100Base-TX to 100Base-FX Converter
■
Auto-Negotiation or forced mode
■
Auto MDI/MDIX
■
Forward 1600 bytes (Max.) packets
■
Support flow control (Pause)
■
Supports Link Fault Pass through (LFP)
s a l e s @ c t c u . c o m
Panel
■ Figure #1. Front Panel of FRM220-10/100
■ Figure #2. Rear Panel of Stand-alone FRM220-10/100
DC Jack
AC Adapter
10/100-AA
10/100-DD
s a l e s @ c t c u . c o m
w w w . c t c u . c o m
10/100-AD
10/100-DC
10/100-AC
w w w . c t c u . c o m
CTC Union Technologies Co., Ltd.
w
w
w
User Guide
10/100BASE-T/TX to 100BASE-FX
Fiber Media Converters - FRM220-10/100
s a l e s @ c t c u . c o m
Specifications
Standards
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, l00BASE-FX
Supports Full/Half Duplex Ethernet mode N-Way Auto Negotlation
10/100BASE-TX RJ-45 Connectors
One RJ-45 connector is provided for connection to MDI-X (To PC) or MDI (To HUB) equipment.
Auto MDI-X allows all UTP connections to be made using only a common straight-through
UTP cable.
RJ-45 Pin
1
2
3
6
100BASE-TX UTP Cable
Cable type: 100Base-Tx; Category 5 or better
Maximum cable distance: 100 meters (328 feet)
Fiber Optic Connectors
Two connectors are provided for fiber optic cable connection.
One is labeled "Tx" for transmission of optical data, the other is
labeled "Rx" for reception of optical data.
Environment
Operating -- -10°C – 60°C, Storage -- -20°C – 70°C,
Humidity -- 10 – 95%, (non-condensing)
Power
Adapter: 12VDC 1A, Built-in AC Power 100~240V ±10% , Built-in DC Power 18~75VDC
Dimensions: (W x D x H) mm
10/100-DC12 : 88 × 160 × 24
10/100-AC/DC : 135 × 201 × 35
10/100-AD/AA/DD : 135 × 201 × 35
s a l e s @ c t c u . c o m
.
c
t
c
u
.
c
o
MDI-X type
MDI type
Rx+
Tx+
Rx-
Tx -
Tx+
Rx+
Tx-
Rx -
w w w . c t c u . c o m
m