Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CTC Union FRM220-CCF40
Summary of Contents for CTC Union FRM220-CCF40
- Page 2 8F, No. 60, Zhouzi St., Neihu, Taipei 114, Taiwan T +886-2-26591021 F +886-2-26590237 E sales@ctcu.com techsupport@ctcu.com marketing@ctcu.com H www.ctcu.com © 2017 CTC Union Technologies Co., LTD. All trademarks are the property of their respective owners. Technical information in this document is subject to change without notice.
-
Page 3: Table Of Contents
User Guide FRM220-CCF40 4-Channel Contact Closure Media Converters Table of Contents Introduction ------- 1 Features/Specifications ------- 2 Panel ------- 3 Installation/SFP ------- 4 LED Indicators ------- 5 Console Management ------- 6 Main Menu Operation ------- 7 Channel Information and Configuration... -
Page 4: Introduction
Always assume that fiber optic cables are connected to a laser light source. Management Features FRM220-CCF40 has an embedded processor which can be used to configure the device for stand-alone operation. When placed in a stand- alone chassis with DB9 console port, these devices support a text based serial terminal with an easy to use menu system for configuration. - Page 5 Features Transmit a single contact closure in one or two directions Transmission distance up to 120KM 125VAC 0.5A or 30VDC 1A relay output Point-to-point transmission architecture Plug-and-play design to ensure ease of installation Hot-swappable rack module Specifications Optical Interface ...
-
Page 6: Panel
Power Operating Voltage: 8~15VDC Support power input reverse polarity protection Consumption: 4W (Max.) Mechanical Dimensions: 155mm (D) x 208mm (W) x 88mm (H) Weight: 200 g Environment Operating Temperature: 0°C~50°C Storage Temperature: -10°C~85°C ... -
Page 7: Installation/Sfp
Remove the dust caps on SFP and patch cables only when ready to plug in optical cables. Installation CTC Union supplied SFP modules are of the Bale Clasp type. The bale clasp pluggable module has a bale clasp that secures the module into the SFP cage. -
Page 8: Led Indicators
Step 1. Open the bale clasp on the SFP module. Press the clasp downward with your index finger. Step 2. Grasp the SFP module between your thumb and index finger and carefully remove it from the SFP cage. Bale Clasp type SFP with bale open LED Indicators Color State... -
Page 9: Console Management
Emulation: VT-100 Default username/password: admin/admin Connect the serial cable to the chassis' DB9. Run the terminal emulation program. About 3 seconds after being powered on, the FRM220-CCF40 will display the login menu as shown in the following example. ***************************************** CTC UNION TECHNOLOGIES CO.,LTD. -
Page 10: Main Menu Operation
Use the [ESC] key to Logout. Any setting is immediately applied to the converter's circuitry. After all of the parameter settings have been selected, go to the Main menu page and press "S" to store the settings in non-volatile RAM (NVR). ***************************************** CTC UNION TECHNOLOGIES CO.,LTD. FRM220-CCF40 Manager ***************************************** Ver:[1.000-1.000-0.010-0.000] [CH-01M <... -
Page 11: Channel Information And Configuration
Channel Information And Configuration << Channel 1 ~ 4 Information And Configuration >> +----+------------+------------+ +----+------------+------------+ | CH | Input (DI) | Output (K) | | CH | Input (DI) | Output (K) | +----+------------+------------+ +----+------------+------------+ 1 | Active | Non Active | 3 | Active | Non Active | 2 | Active... -
Page 12: Fiber Information And Configuration
<1> Port Active: Enable or disable this fiber port. When disabled, this port is forced down regardless of the fiber connection <2> Loopback: Enable or disable loopback function. This FRM220-CCF40 media converter incorporates loop back features which allow loop back testing to confirm that the fiber optic connection is operating normally or not. -
Page 13: Device Information And Configuration
LOS and its ALS agent will turn off the transmitter. In this way the entire fiber will go dark. <D>DD Information: View digital diagnostics information of the inserted SFP transceiver. ***************************************** CTC UNION TECHNOLOGIES CO.,LTD. FRM220-CCF40 Manager ***************************************** Ver:[1.000-1.000-0.010-0.000] [CH-01M <<... -
Page 14: Upgrading
Upgrading Stand-alone Firmware Upgrading via Xmodem The FRM220-CCF40 card may be firmware upgraded using XMODEM when placed in the chassis such as CH02M. The user may use serial terminal such as a notebook computer that has an RS232 port or via a commonly available USB to RS232 adapter. - Page 15 Select "Y" and then send Firmware file via Xmodem and select the Firmware file that you want to upload. Start upgrading new Firmware image. Check the Firmware version after completing the Firmware upgrade process. - 12 - w w w . C T C U . c o m...
- Page 16 Firmware Upgrading via NMC Card The FRM220-CCF40 card may be firmware upgraded when it is placed in the FRM220 with NMC management card. The user may use a local console connection to the NMC, a remote Telnet (IP) connection, or a Web based (HTTP) connection with any available browser.
-
Page 17: Application
Application FRM220-CCF40 provides 4 channels of input and output. In the following example, I1 connector receives power input and then sends signals via fiber optic to the remote device. The remote device reacts depending on signals received. See below for the illustrative application diagram.