Testing Flow Chart With Over Speed Electronics - BD Diesel Performance 1036700 Installation Instructions Manual

4 February 2010

TESTING FLOW CHART with OVER SPEED ELECTRONICS

Start Vehicle
Activate PAS valve using
manual switch
Did Valve Activate
Did engine stall
Reset Valve
Set electronic module to Position
2. Test automatic RPM
activation
Raise engine RPM >
1200 RPM
Did Valve Activate
Did engine stall
Reset Valve, and return
electronics to Position #1
Testing Complete
US Shipping Address: 88-446 Harrison St, Sumas, WA 98295 US Mailing Address: PO Box 231, Sumas, WA 98295
Ford 7.3L 1999.5-2003 Positive Air Shutoff
Automatic Mode
N
Check
Wiring
N
Check valve
N
Check Wiring
N
Check Valve
BD ENGINE BRAKE, INC.
Plant Address: A10-33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Phone: 604-853-6096 Fax: 604-853-8749 Internet: www.bd-power.com
Manual Mode
Start Vehicle
Activate PAS valve using
manual switch
N
Did Valve Activate
N
Did engine stall
Ensure Electronic Module
is set to Position 3
Depress RPM SET
Button
(LED Illuminates)
Raise RPM to desired
TEST speed
Release RPM SET
Button
Raised engine RPM to
desired TEST Speed
+25%
N
Did Valve Activate
N
Did engine stall
Reset Valve, Restart
Engine
Depress & HOLD RPM
SET Button
(LED Illuminates)
Raise RPM to FULL
ENGINE SPEED
Release SET Button
Testing Complete
Check Wiring
Check valve
Check Wiring
Check valve
29