Table of Contents
Advertisement
4 February 2010
1302268P
3. First install the new BD lower Charge Air Cooler (CAC) tube (#1302268P) to the
CAC. You will utilize the stock clamps and silicone boot for the lower connection.
4. Next, insert the two 3-3¼" boots (#1405404) over each end of the PAS valve.
Tighten this connection with 2 of the 3.78" (#1405212) spring clamps. Tighten until
spring bound.
5. Then install the PAS/Boot assembly to the lower CAC pipe you installed earlier.
Rotate the assembly as the valve our pipe do not contact any other components.
Secure this connection with the 3.5" (#1407030) spring clamp.
6. Finally install the upper CAC pipe (1302269P) to the PAS/Boot assembly. Again
secure this connection with 3.5" (#1407030) spring clamp.
7. Lastly, install the 3" boot (#1407001) to the upper CAC pipe and the stock aluminum
compressor manifold. You will utilize the factory clamps for this location.
8. Ensure the assembly does not contact anything.
US Shipping Address: 88-446 Harrison St, Sumas, WA 98295 US Mailing Address: PO Box 231, Sumas, WA 98295
Ford 7.3L 1999.5-2003 Positive Air Shutoff
1405404
1302300
All springs should be tightened until springs binds.
BD ENGINE BRAKE, INC.
Plant Address: A10-33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Phone: 604-853-6096 Fax: 604-853-8749 Internet: www.bd-power.com
AIRFLOW
1302269
1407001
16
Advertisement
Table of Contents
