Table of Contents
Advertisement
4 February 2010
14. For the last connection you
will need to locate ignition
power.
Locate
the
underneath
the
wheel.
Remove the kick
panel and then the junction
box cover.
Locate appropriate fused
ignition power circuit (see
table below).
tapper on to fuse, reinstall
fuse. Trim the pink wire to
length and crimp the flag
connector to the wire and
connect the pink lead wire
with flag connector to this
new connection. Route wire
out of the box and close lid
and kick panel.
15. Double check all wiring connections and ensure wires are routed away from any
heat sources and moving parts. Then install the loom with the supplied tee
connector and clips for the loom ends and continue to the testing flow chart without
engine over speed electronics in this manual.
US Shipping Address: 88-446 Harrison St, Sumas, WA 98295 US Mailing Address: PO Box 231, Sumas, WA 98295
Ford 7.3L 1999.5-2003 Positive Air Shutoff
kick
panel
steering
Install fuse
BD ENGINE BRAKE, INC.
Plant Address: A10-33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Phone: 604-853-6096 Fax: 604-853-8749 Internet: www.bd-power.com
Fuse #29 (10 AMP)
20
Advertisement
Table of Contents
