Table of Contents
Advertisement
4 February 2010
9. Lay out supplied harness
over top of the passenger's
side of the engine.
And locate and connect the
weather pack connector on
the wiring harness to the
solenoid on the PAS valve.
10. You will then need to route
the switch wires as well as
the
pink
ignition
through the firewall on the
driver's side (note you will
need to remove the switch
from
the
accomplish this).
Choose
a
highly
location for the switch and
mount it to the dash.
NOTE: you may need to
trim the switch wires to
length
once
located where the switch is
to be mounted.
US Shipping Address: 88-446 Harrison St, Sumas, WA 98295 US Mailing Address: PO Box 231, Sumas, WA 98295
Ford 7.3L 1999.5-2003 Positive Air Shutoff
power
harness
to
visible
you
have
BD ENGINE BRAKE, INC.
Plant Address: A10-33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Phone: 604-853-6096 Fax: 604-853-8749 Internet: www.bd-power.com
Switch end of wiring harness & pink
wire should be routed through the kick
panel.
17
Advertisement
Table of Contents
