Table of Contents
Advertisement
4 February 2010
18. Next on the wiring harness
connection the BLACK and
RED wires to the respective
battery
(Driver's Side Battery).
19. For the last connection you
will need to locate ignition
power. This will power the
automatic
control box LED switch.
Note that they unit can still
be activated manually with
the switch at any time.
Locate
the
underneath
wheel.
Remove the kick
panel and then the junction
box cover.
Locate appropriate fused
ignition power circuit (see
table below).
tapper on to fuse, reinstall
fuse. Connect yellow lead
wire with flag connector to
this new connection. Route
wire out of the box and
US Shipping Address: 88-446 Harrison St, Sumas, WA 98295 US Mailing Address: PO Box 231, Sumas, WA 98295
Ford 7.3L 1999.5-2003 Positive Air Shutoff
connections
over
speed
kick
panel
the
steering
Install fuse
Plant Address: A10-33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Phone: 604-853-6096 Fax: 604-853-8749 Internet: www.bd-power.com
Fuse #29 (10 AMP)
BD ENGINE BRAKE, INC.
13
Advertisement
Table of Contents
