Table of Contents
Advertisement
4 February 2010
5. With the valve reset, remove the outer
enclosure from the control module.
There are two locking tabs on the sides
of the enclosure.
6. Change the position selection switch
to position #2 (Auto Test).
enclosure cover over circuit board.
7. Start the vehicle, with the vehicle in
park step on the throttle increasing
the engine RPM.
PAS
should
automatically, and the engine should
stall.
Like with all activations the
US Shipping Address: 88-446 Harrison St, Sumas, WA 98295 US Mailing Address: PO Box 231, Sumas, WA 98295
Ford 7.3L 1999.5-2003 Positive Air Shutoff
Slide
At 1200RPM the
engage
itself
BD ENGINE BRAKE, INC.
Plant Address: A10-33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Phone: 604-853-6096 Fax: 604-853-8749 Internet: www.bd-power.com
If the engine did not stall, check to make
sure the valve actuated.
If the valve did not actuated, double
check
the
engine
connection.
Check the RPM Signal LED on the circuit
25
RPM
electrical
Advertisement
Table of Contents
