Table of Contents
Advertisement
1.
Tap the
POWER/ SOURCE BUTTON (#1) to turn on the unit.
2.
Tap the
POWER/ SOURCE BUTTON (#1) repeatedly to select the CD mode.
3.
Press
OPEN/CLOSE BUTTON (#12) to open the CD door and carefully place an
audio CD / MP3 CD with its label side upward in the CD compartment and press
OPEN/CLOSE BUTTON (#12) to close the CD door.
4.
The player will start reading TOC of the disc.
5.
The total number of tracks on the CD will appear on the LCD DISPLAY after a few
seconds. MP3 CD will take some more time.
6.
Tap the PLAY/PAUSE
7.
Adjust the VOLUME - / VOLUME+ ((#10 / #11) to obtain the desired volume level.
8.
To suspend playing, tap the PLAY/PAUSE
tap the PLAY/PAUSE
9.
You can choose to play your favorite track directly by tap the
BUTTON (#8). The LCD Display will indicate the correct track number selected.
10. To locate a particular section within a track, press and hold the
BUTTON (#8) until the section is found.
11. To repeat a particular track, tap the PLAY MODE BUTTON (#4) repeatedly until the REP
1 icon lights on the LCD DISPLAY (#15).
12. To repeat the entire CD, tap the PLAY MODE BUTTON (#4) repeatedly until the REP
ALL icon lights on the LCD DISPLAY (#15).
13. To repeat the random track, tap the PLAY MODE BUTTON (#4) repeatedly until the
RAND icon lights on the LCD DISPLAY (#15).
14. To stop playing, tap the
15. Press and hold the
PROGRAM OPERATION
This function allows the tracks to be played in a programmed sequence. Programs can be set
in STOP mode.
1.
Tap the
POWER/ SOURCE BUTTON (#1) to turn on the unit.
2.
Tap the
POWER/ SOURCE BUTTON (#1) repeatedly to select the CD mode.
3.
Tap the PROG BUTTON (#3) once. The PROG icon and program number "P01" will
show on the LCD DISPLAY (#15).
4.
Tap the
BUTTON (#5) /
programmed.
5.
Tap the MEM/PROG BUTTON (#3) again to store selection. The Program Channel No.
will change to P02.
6.
You may repeat steps 4 - 5 to program as many as 20 tracks.
7.
Tap the
BUTTON (#7) to start the programmed play.
8.
You may tap the PLAY MODE BUTTON (#4) repeatedly to select REP 1 or REP ALL
programmed tracks.
9.
Tap STOP
10. Tap the
BUTTON (#7) to resume programmed play.
11. To cancel programmed play and, press the STOP
BUTTON (#7) to start to play.
BUTTON (#7) again.
BUTTON (#6).
POWER/ SOURCE BUTTON (#1) to turn off the unit.
BUTTON (#6) once to stop playback.
BUTTON (#7) again. To resume playing,
BUTTON (#8) repeatedly to select the track to be
E-13
BUTTON (#5) /
BUTTON (#5) /
BUTTON (#6) twice.
Advertisement
Table of Contents
