Registering And Deleting Projectors For Monitoring; Starting Emp Monitor - Epson EMP Operation Manual

Registering and deleting projectors for monitoring

This operation is carried out when starting EMP Monitor for the first
time after it has been installed and when you would like to add
projectors. Once a projector has been registered, the status for the
projector will be displayed automatically each time EMP Monitor is
started from that point onwards.

Starting EMP Monitor

Procedure
A
Click Start - Programs (or All Programs) - EPSON Projector -
EMP Monitor V4.30 in that order to start EMP Monitor.
B
The main window will be displayed.
The area described in red box is referred to as Grouping view.
The operations to register projectors using the automatic search will
vary depending on where the projectors are connected to in the network.
• When registering a projector that is located in the same segment as
the computer in witch EMP Monitor is installed.
projectors using automatic search (Searching for and registering
projectors that are located in the same segment)"
• When registering projectors that are in multiple segments of the
network. "Setting the range of addresses to do an automatic
s
search and registration" p.12
9
"Registering
s
p.10