Epson Stylus Pro 9000 Series Manual page 3

Mechanical
Paper feed Friction
method
Paper path Roll paper or cut sheets with manual
insertion
Dimensions Width: 66.46 inches (1688 mm)
Depth: 27.52 inches (699 mm)
Height: 49.57 inches (1259 mm)
Weight 211.64 lb (96 kg) without ink cartridges
Environmental
Temperature Operation: 50 to 95 °F (10 to 35 °C)
Storage:
Transit
Humidity Operation: 20 to 80% RH
(without Storage:
condensation) Transit
Safety Approvals
Safety standards UL 1950, CSA C22.2 950
EMC FCC part 15 subpart B class B
CSA C108.8 class B
Interfaces
Parallel interface
The built-in parallel interface supports compatibility and ECP
modes.
Compatibility mode
Forward channel
Data format 8-bit parallel, IEEE-1284 compatibility
mode
Synchronization
STROBE
4 to 104 °F ( 20 to 40 °C)
– –
1 month at 104 °F (40 °C)
4 to 140 °F ( 20 to 60 °C),
– –
stored in shipping container
120 hours at 140 °F (60 °C)
20 to 85% RH
5 to 85% RH (stored in
shipping container)
pulse
EPSON Stylus Pro 9000 series
Handshake
BUSY
timing
Signal level TTL compatible
Connector 57-30360 Amphenol connector or
equivalent
Reverse channel
Transmission IEEE-1284 Nibble mode
mode
Adaptable 57-30360 Amphenol connector or
connector equivalent
Synchronization Refer to the IEEE-1284 specification
Handshaking Refer to the IEEE-1284 specification
Signal level IEEE-1284 Level 1 device
Data Refer to the IEEE-1284 specification
transmission
timing
ECP mode
Transmission IEEE-1284 ECP mode
mode
Adaptable 57-30360 Amphenol connector or
connector equivalent
Synchronization Refer to the IEEE-1284 specification
Handshaking Refer to the IEEE-1284 specification
Signal level IEEE-1284 Level 1 device
Data Refer to the IEEE-1284 specification
transmission
timing
You can use a USB conversion cable, such as the EPSON USB
adapter (C-USB-PK4), to connect to the printer's parallel
port. Make sure the printer's parallel interface is set to
compatible (the default setting).
8/00
and signals
ACKNLG
EPSON Stylus Pro 9000 series - 3