Control Panel - Epson Stylus Pro 9000 Series Manual

EPSON Stylus Pro 9000 series
Options
Option
EPSON RS-5100 Fiery X2 Printing System:
EPSON Stylus Pro 9000
EPSON Stylus Pro 9500
Automatic take-up reel system
Replacement 44" take-up reel core
Roll paper spindle—2 inch
Roll paper spindle—3 inch
High tension spindle—2 inch
High tension spindle—3 inch
Replacement cutter blade
EpsonNet Internal Print Server
(multiprotocol 10/100 Base-TX Ethernet Card)
®
EPSON FireWire Interface Card
Printer only service plan—1 year
Printer only service plan—2 years
Printer and EPSON RS-5100 service plan—1 year
Printer and EPSON RS-5100 service plan—2 years EPP90S2

Control Panel

Operate
K C
Paper Out
display
Roll
Auto Cut
Roll
Cutter Off
Sheet
Power
6 - EPSON Stylus Pro 9000 series
Product Code
C850122
C850152
C815082
C815121
C811041
C811051
C811042
C811052
C815131
C823632A
C823722
EPP90B1
EPP90B2
EPP90S1
Pause
Reset
3 sec.
Ink Out
M LC LM Y
SelecType
Paper Source
Item
+
Paper Feed
_
Cut /Eject
Enter
Cleaning
3 sec.
Control Panel Buttons and Functions
Button
Power
Cleaning
Pause (Reset 3 Sec.)
SelecType
Paper Source (Item)
Paper Feed L (+)
M
Paper Feed (–)
Cut/Eject (Enter)
Control Panel Lights and Messages
Normal printer operation
Message/Light
/ light on
READY Operate
PRINTING / Operate light
flashing
INK DRY <number> MIN
light flashing
/ all lights flash briefly
RESET
PRESS PAUSE BUTTON
light on
WAIT / Pause light on or
flashing
PAUSE/ Pause light on
8/00
Function
Turns the printer on and off.
Runs print head cleaning when pressed for
3 seconds.
Stops printing temporarily. Press a second
time to resume printing.
Clears print data in the printer memory if
pressed and held for three seconds.
Returns the printer to READY status, when
pressed in SelecType mode.
Causes the printer to enter SelecType mode
when pressed in READY status.
In SelecType mode, this button can be used
to select a desired menu.
Selects the paper source:
Roll Auto Cut
Cutter Off , or Sheet . If you press this button
during the ink drying process, you will need to
press to make your setting.
Enter
In SelecType mode, this button can be used
to select an item in a menu.
Feeds paper in reverse.
In SelecType mode, a desired parameter can
be selected for the item (forward order).
Feeds paper forward.
In SelecType mode, a desired parameter can
be selected for the item (reverse order).
Ejects the cut sheet when the
on.
Feeds the roll paper before cutting it when the
light is on.
Roll Auto Cut
Feeds the roll paper a small amount when the
Roll Cutter Off light is on.
Feeds the roll paper and then prints a page
line below the document when the
Off light and Print Page Line option are on.
In SelecType mode, sets the selected
parameter for an item as the default value.
Explanation
Printer is ready to print.
Printer is receiving data.
/ Printer is paused to let ink dry. Wait
Pause
for the number of minutes shown.
Printer is resetting.
/ Press the button to continue.
Pause Pause
Printer is warming up, performing
maintenance, or charging ink.
Printer is paused. To resume printing,
press the button.
Pause
,
Roll
light is
Sheet
Roll Cutter