Download Print this page

Getting Your Alarm Serviced - Ei Electronics EiA605MRF Instructions Manual

Rf modules for battery powered smoke & heat alarms

Advertisement

RadioLINK Limitations
Limitations of RadioLINK Radio Frequency Signals
Ei Electronics radio communication systems are very reliable and are tested to high
standards. However, due to their low transmitting power and limited range (required
by regulatory bodies) there are some limitations to be considered:
(i) Receivers may be blocked by radio signals occurring on or near their operating
frequencies, regardless of the House Coding.
(ii) Alarms with RadioLINK modules should be tested regularly, at least weekly.
This is to determine whether there are sources of interference preventing
communication, that the radio paths have not been disrupted by moving furniture
or renovations, and if so, to give a warning of these and other faults.
Changes/modifications to this device not approved by Ei Electronics could void the
user's authority to operate the equipment.

Getting Your Alarm Serviced

If your Alarm fails to work after you have read the sections on "Installation", "Testing
and Maintenance" and "Troubleshooting", then contact Customer Assistance at
the nearest address given at the end of this leaflet. If it needs to be returned for
repair or replacement put it in a padded box with the battery disconnected. Send
it to "Customer Assistance" at the nearest address given on the Alarm or in this
leaflet. State the nature of the fault, where the Alarm was purchased and the date
of purchase.
9

Advertisement

loading

This manual is also suitable for:

Eia600 series