Advertisement
Quick Links
Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and
satisfactory operation of this product.
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools :
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the retailer from whom you bought this
product.
This product takes approximately 10 MINUTES to assemble with 1 PEOPLE.
All assembly should be performed on a flat, stable, clean and soft surface.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product
The fitting pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
IMPORTANT: Retain these instructions for future reference.
WIDE SIDEBOARD
Stock number: 300X- 1 5
Page :
1
IW- 1 7-300X-20- 3 -R 2
Advertisement
Related Manuals for Bentley Designs 300X-15
Summary of Contents for Bentley Designs 300X-15
- Page 1 WIDE SIDEBOARD Stock number: 300X- 1 5 Thank you for purchasing this product. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product. Necessary Tools : Please check the pack contents before attempting to assemble this product.
- Page 2 2 x2 Fittings and parts checklist Description Qty. Description Qty. Item Item Adjustable shelf Top unit Wood shelf support Page : 2 IW- 1 7-300X-20- 3 -R 2...
- Page 3 Step By Step Assembly Instructions Step 1 1 . 1 : Insert 4x wood shelf supports (A) into the pre-drilled holes in left side panel and partition of top unit ( 1 ) as shown. 1 .2 : Tilt adjustable shelves(2) to a suitable angle as show in picture so as to slide it in. 1 .3 : Slide adjustable shelves (2) into the unit.
-
Page 4: Lateral Adjustment
HINGE ADJUSTMENT INSTRUCTIONS LATERAL ADJUSTMENT by screw adjustment. FRONT-TO-BACK by slackening and retightening the hinge-arm mounting screw. VERTICAL ADJUSTMENT via slots on mounting plate by slackening and retightening the screws on mounting plate Page : 4 IW- 1 7-300X-20- 3 -R 2... - Page 5 HINGE ADJUSTMENT INSTRUCTIONS LATERAL ADJUSTMENT by screw adjustment. FRONT-TO-BACK by slackening and retightening the hinge-arm mounting screw. VERTICAL ADJUSTMENT via slots on mounting plate by slackening and retightening the screws on mounting plate Page : 5 IW- 1 7-300X-20- 3 -R 2...
- Page 6 TANDEM RUNNER ADJUSTMENT INSTRUCTION REMOVE Extend the runner all the way out Unlock by pulling the black plastic peg on the runner out Back hook Remove drawer box Front metal pin Hold both runners with both of your hands. Carefully lift the drawer front up from the front metal pin, then slide forward to remove from back hooks VERTICAL ADJUSTMENT (±...
- Page 7 TANDEM RUNNER ADJUSTMENT INSTRUCTION ASSEMBLE Back hook Extend the runner all the way out. Put the drawer onto them then hold both the runners with your hands, lift the drawer up with your thumbs and push to hook the drawer at the end of the runner Hole/ Front metal pin Hole/ Plastic peg Once the back hook is connected gently lower the...
- Page 8 Care and Maintenance Wood Furniture Wood displays different grain patterns depending on which way they are cut - for example, the 'medullary ray' which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the wood.