32
|
Handling Paper and Other Media
Roll Paper Guidelines
When printing on roll paper, be sure to follow the media handling
guidelines on page 18, as well as these special guidelines for roll paper:
When storing roll paper, keep it in its original packaging—including the
•
bag, end caps, and box.
To avoid feeding excess paper, make sure the
•
appear on the LCD display. Press the
or
roll icon appears on the LCD display.
Choose
if you want the paper to be cut automatically after each
•
page is printed.
Choose
if you're printing on canvas or other heavy media. Media
•
that is too thick will damage the cutter. Use of a rotary paper
cutter/trimmer is recommended.
Also choose this setting if you want to print a series of pages and keep
them together for cutting later on. The following media (and other
similar materials) do not work with the built-in cutter:
Fine art paper (including EPSON Textured and UltraSmooth Fine
•
Art Paper)
PremierArt Water Resistant Canvas for Epson
•
Vinyl
•
Matte board
•
Backlight film
•
Heavyweight polyester banner media
•
DuPont
Semigloss Proofing Paper
•
™
If you're loading heavy paper, you may need to increase the suction
•
strength by pressing the paper feed
in place during loading and printing.
For lightweight paper, decrease the suction by pressing the
Release the paper lever to view the suction setting.
1-32
Sheet icon does not
Paper Source button until the
button. This helps hold the paper
button.