Using Roll Paper; Roll Paper Guidelines - Epson pro4880gd Printer Manual

Epson printer installation guide
Hide thumbs Also See for pro4880gd:
Table of Contents

Advertisement

42
|
Handling Paper and Other Media
Caution: Some 2-inch
core roll paper at widths
smaller than 10" may
cause the print head to
strike the surface of the
paper due to paper
curling. This will damage
the paper by leaving
scratch marks on the
surface of the paper and
it can also cause paper
jams if the paper is torn
during the printing
process. If you notice
head strike marks or
paper jams when printing
on this type of paper,
Epson recommends
printing on 3-inch core
paper or wider paper.

Using Roll Paper

You can use roll paper with a 2- or 3-inch core, up to 17 inches wide.
Manually switching from one paper roll to another is a simple process.
Check the Epson Pro Imaging website (www.proimaging.epson.com) or
your Epson Professional Imaging authorized reseller for available media.

Roll Paper Guidelines

When printing on roll paper, be sure to follow the media handling
guidelines on page 30, as well as these special guidelines for roll paper:
When storing roll paper, keep it in its original packaging—including the
bag, end caps, and box.
To avoid feeding excess paper, make sure the
appear on the LCD display. Press the
or
roll icon appears on the LCD display.
Choose
if you want the paper to be cut automatically after each
page is printed.
Choose
if you're printing on canvas or other heavy media. Media
that is too thick will damage the cutter. Use of a rotary paper
cutter/trimmer is recommended.
Also choose this setting if you want to print a series of pages and keep
them together for cutting later on. The following media (and other
similar materials) do not work with the built-in cutter:
Fine art paper (including Epson UltraSmooth, Textured, and
Velvet)
Canvas
Vinyl
Matte board
Heavyweight polyester banner media
Release the paper lever to view the suction setting. The suction helps
hold the paper in place during loading and printing.
If you're loading heavy paper, you may need to increase the suction
strength by pressing the paper feed
42
Sheet icon does not
Paper Source button until the
button.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus pro 4880

Table of Contents