System Requirements; Fiery Spark Server - Epson Stylus Pro 10000 Quick Installation Manual

System Requirements

Before you install the software, make sure your computer meets the minimum
system requirements listed below.

Fiery Spark Server

Pentium ® 4 1.2GHz (1.7GHz recommended)
•
Microsoft ® Windows 2000 Professional (Service Pack 2 or later required)
•
/
Windows 2000 Server is recommended if you have more than
Note
10 users printing concurrently, require support for SMP with more
than two CPUs, or require greater fault tolerance.
512MB RAM
•
At least 500MB free hard disk space to install the software and at least 1GB
•
free disk space for processing files (4GB or more available hard disk space
recommended)
USB connection for the Stylus Pro 7600 and 9600 or FireWire
•
IEEE 1394 connection for the Stylus Pro 10000 and 10600
Netscape ® Communicator
•
Microsoft Internet Explorer version 5.0 or 5.5 with Java enabled, for Fiery
WebTools
A TCP/IP-enabled network and the IP address or computer name for the
•
Fiery Spark server
File and Printer Sharing for Microsoft Network enabled for PC clients
•
AppleTalk ®
•
® version 4.5 or 4.7 with Java enabled, or
Protocol enabled for Macintosh
Fiery Spark Server
® clients
| 3
®