Disassembling The Sewing Motor - DURKOPP ADLER D868 Service Instructions Manual

16.2 Disassembling the sewing motor

Fig. 87: Disassembling the sewing motor (1)
(1) - Screws
To disassemble the sewing motor:
1. Switch off the machine.
2. Disassemble the arm cover ( p. 19).
3. Loosen screws (1) on the handwheel (2).
4. Remove the handwheel (2).
5. Disassemble the toothed belt cover ( p. 23).
6. Disassemble the motor cover ( p. 22).
7. Disassemble the front cover ( p. 20)
Fig. 88: Disassembling the sewing motor (2)
(3) - Tensioning roller
(4) - Screw
8. Loosen the screw (5).
100
①
②
③
④
The holder will not be removed.
(2) - Handwheel
(5) - Screw
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020
Sewing motor
⑤