Thread trimmer (FA)
13.6 Adjusting the hook thread clamp
Fig. 72: Adjusting the hook thread clamp (1)
(1) - Thread-pulling knife
(2) - Hook thread clamp
(3) - Counter blade support
To adjust the hook thread clamp:
1. Loosen the screw (5).
2. Slide a small slotted screw driver (4) between hook thread clamp (2)
3. Use the screw driver (4) to adjust the hook thread clamp (2) such
4. Tighten the screw (5).
5. Check if the hook thread remains clamped after cutting between
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020
①
②
and counter blade support (3).
that the hook thread can be pulled out with a force between 160 and
180 grams.
the hook thread clamp (2) and the thread-pulling knife (1).
(4) - Slotted screw driver
(5) - Screw
⑤
④
③
87