Table of Contents
Advertisement
Physical Descriptions
CONSOLE Interface
The
interface is an EIA-232 serial port (DCE) that provides for local management and
CONSOLE
configuration (via a DB-9 female connector).
Connection directly to an external modem requires a cross-over cable.
NetVanta 1234 Rear Panel Design
The NetVanta 1234 rear panel is shown below.
NetVanta 1234 Rear Panel Interfaces
Power Connection
The rear panel has a power input to the AC universal power supply. Please refer to
the Unit on page 25
NetVanta 1234P Front Panel Design
The NetVanta 1234P front panel is shown below.
A on page 27
shows the connector pinouts.
1
2
3
4
5
6
7
8
9
10
STAT
LNK/ACT
VCID
PoE
NetVanta 1234P
NetVanta 1234P Front Panel Features
Status LED
The
LED, located on the left side of the unit, indicates the unit's status.
STAT
Link/Activity LED
The LNK/ACT LED, located on the left side of the unit, indicates that the port LEDs are displaying
link/activity status.
Power over Ethernet LED
The PoE LED, located on the left side of the unit, indicates that the port LEDs are displaying PoE
status.
VCID LED (Future Release)
The VCID LED, located on the left side of the unit, indicates that the port LEDs are displaying VCID.
16
Figure 2. NetVanta 1234 Rear Panel Layout
for connection details.
Table 1 on page 20
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Figure 3. NetVanta 1234P Front Panel Layout
Copyright © 2014 ADTRAN, Inc.
NetVanta 1230 Series Hardware Installation Guide
describes all of the LEDs, and
G1
G1
G2
G3
G4
G2
AC INPUT
Supplying Power to
Appendix
61702594G1-34D
Advertisement
Table of Contents
