Advertisement
MAINTENANCE
WARNING :
TO AVOID ELECTRICAL SHOCK REMOVE TEST LEADS BEFORE OPENING THE COVER.
4-1 General Maintenance
1. Repairs or servicing not covered in this manual should only be performed by qualified personal.
2. Periodically wipe the case with a dry cloth and detergent do not use abrasives or solvents.
4-2 Battery Installation or Replacement
The meter is powered by two 1.5V battery. Refer to Figure 2 and use the following procedure to replace the
battery:
1. Disconnect the test leads and turn the meter off. Remove the test leads from the front terminals.
2. Position the meter face down. Unscrew the self-retaining battery cover screw (i) .
3. Lift the edge of the battery cover gently (ii) unit it unsnaps from the meter case.
4. Lift the battery box (iii) from the meter case and remove the 2 x AAA batteries.
5. Fit new batteries into the battery box, observing correct polarity. Place the battery box back in to the meter case.
6. Replace the battery cover, making sure that battery leads do not become pinched.
23
Advertisement
