Advertisement
3.3.5 Using the USB Cable
(1)
Connect the USB Type-C connector to the connector at the
bottom of the BHT.
(2)
Connect the USB Type-A connector to the USB power
adapter.
3.3.6 Using the Charging Cradle
Plugging in the cradle
Connect the dedicated power adapter, the USB
cable and/or USB power adapter to the cradle.
Plug in the AC plug or the AC adapter.
The right figure is for when the CU-M70U is
plugged in using the power adapter.
The right figure is for when the CU-M70UQ is
connected using the USB cable and USB power
adapter.
Power Supply for CU-M70U/L
Use ONLY a DNWA approved Nationally Recognized Test Laboratory (NRTL) Certified ITE
(LPS/SELV) power supply with electrical ratings:
Output 12 VDC, min 4.16 A, with a maximum ambient temperature of at least + 40°C. Use of
alternative power supply will invalidate any approvals given to this unit and may be dangerous.
Power Supply for CU-M70UQ
Use ONLY a DNWA approved Nationally Recognized Test Laboratory (NRTL) Certified ITE
(LPS/SELV) power supply with electrical ratings:
Output 5 VDC, min 3 A, with a maximum ambient temperature of at least + 40°C. Use of alternative
power supply will invalidate any approvals given to this unit and may be dangerous.
Not light
Charging error (Charging stops.)
10
Advertisement
