Setting The Clock - Sharp R-757M Operation Manual With Cookbook

R-757M Modular Manual
Your oven has a 12 hour and a 24 hour clock.
• To select the 12 hour clock, press the DELAY
START/CLOCK SET key once. "12H" will
appear on the display.
• To select the 24 hour clock, press the
DELAY START/CLOCK SET key
twice. "24H" will appear on the display.
To set the time of day follow the instructions
opposite.
NOTES:
• Press the STOP/CLEAR key if you make a
mistake during programming.
• If you press any of the TIME keys too many
times, continue to press the key until the
desired time re-appears.
• To check the time of day during a cooking
process, press the DELAY START/CLOCK
SET key and the time of day will remain on
the display as long as you keep your finger on
the key. This does not affect the cooking
process.
• If the clock is set, when cooking is complete,
the display will show the correct time of day.
If the clock has not been set, the display will
only show " : " when cooking is complete.
• If the electrical power supply to your
microwave oven is interrupted, the display will
intermittently show "88:88" after the power is
reinstated. If this occurs during cooking, the
programme will be erased. The time of day will
also be erased.
• When you want to reset the time of day,
follow the opposite example again.
Downloaded from: http://www.usersmanualguide.com/
03/04/2003 08:54 Page 8

SETTING THE CLOCK

1. Select the clock type required.
x1
2. Enter the hours by pressing the TIME keys.
x2
3. Press the DELAY START/CLOCK SET
key once.
4. Enter the minutes by pressing the TIME keys.
5. To start the clock, press the DELAY
START/CLOCK SET key once.
8
x1
x1