Settings - GE PCHB920 Owner's Manual

Electric induction free-standing range
Hide thumbs Also See for PCHB920:
Table of Contents

Advertisement

Options
The Options and Settings pads open up more detailed menus in the display that allow access to additional
functions. For each you select the function in the display using the associated number pad. You can exit at
any time by pressing the Options or Settings pad again.
These settings include Warm, Proof, Frozen - Snacks, Frozen Pizza, and Baked Goods. See the cooking
modes section for more information.
You must first select a mode (bake, convection bake, convection roast) and then select Options to get to the
following functions.
Cook Time
Counts down cooking time and turns off the oven when
the cooking time is complete. Select a desired cooking
temperature. Press the Options pad and select Cook
Time
and minutes. Then press Start/Enter.
Start Time
time when you want the oven to start. Select a desired
temperature. Press the Start Time. Use the number pads
to program the time of day for the oven to tur on, and
then press Start/Enter. Delay Time is not available with
all modes.
Special Features
There are several different special features on your range.
To enter the Special Features menu, press the Bake and Broil pads at the same time and hold for three seconds.
"OFFSET" will appear in the display.
Scroll through Special Features menu using the 8 pad for down and the 3 pad for up.
To select a feature to change, or to confirm a change, press the 0 pad.
To cancel a change and return to the Special Features menu, press the 6 pad. To exit the Special Features menu,
press the 6 pad again.
Adjust the Oven Temperature (OFFSET)
This feature allows the oven baking and convection
baking temperature to be adjusted up to 35ºF hotter
or down to 35ºF cooler. Use this feature if you believe
your oven temperature is too hot or too cold and wish to
change it. This adjustment affects Bake and Convection
Bake modes. No other cooking modes are affected.
Using the number pads to navigate as described above,
select "OFFSET". A number between positive and
negative 35 will display. Use the 8 or 3 pads to increase
or decrease the offset value. Save and confirm by
pressing the 0 pad.
End of Timer Signals (End tone)
This is the tone that signals the end of a timer. The tone
can be continuous (Con bEEP) or one repeating beep
(bEEP). A continuous setting will continue to sound a
tone until a button on the control is pressed.
NOTE:
When using the Start Time feature, foods that
spoil easily – such as milk, eggs, fish, stuffing, poultry,
and port – should not be allowed to sit for more than
1 hour before or after cooking. Room temperature
promotes the growth of harmful bacteria. Be sure that the
oven light is off because heat from the bulb will speed
harmful bacteria growth.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents