Multiple Call Appearances - ADTRAN POLYCOM SoundPoint IP 430 User Manual

Multiple Call Appearances

Each line on the phone can be configured to have
one or more call appearances. More than one
call appearance is useful if there is an active call
and an incoming call arrives on the same line.
In the example shown, extension 2020 is in an
outbound call with 2024. The second diagram
shows an incoming call from John Brown. To
answer this incoming call, put the original call on
Hold or press the
Soft key labels will be updated on the display
with these options:
1. Answr the incoming call.
2. Reject the incoming call.
3. Forward the incoming call to another exten-
1 ABC 2 DEF 3
1 2 3
sion.
ABC DEF
4 5 6
GHI JKL MNO
4 5 6
Answering the incoming call places the original
GHI JKL MNO
call on Hold and refreshes the soft key labels as
7 8 9
PQRS TUV WXYZ
7 8 9
indicated (third illustration). If more than one
PQRS TUV WXYZ
call appearance is in use, one will appear on the
0
* OPER #
0
display and the total number will be indicated by
OPER
a counter at the top right corner of the display.
For example "2/3" indicates that the highlighted
call is the second one out of a total of three.
In the example case illustrated, another out-
bound call can be placed on the same first line.
Press Hold during the first call and press NewCall
to obtain dial tone and a new call appearance for
a second call.
All manuals and user guides at all-guides.com
Sel
key to access the new call.
Del
Menu
Messages
Do Not Disturb
Hold
16