LCD BACKLIGHT
Use the LCD Backlight function to change the brightness level of the Trek3's LCD
backlight.
Enter Set-Up mode and navigate to the
directions in Figure 12 to configure the backlight brightness. The brightness can
be adjusted between 0 and 100% in steps of 10%.
Figure 12: Configuring the LCD backlight brightness level
FACTORY RESET
Enter Set-Up mode and navigate to the
directions in Figure 13 to perform a factory reset and restore the Trek3 to the
factory settings.
baHLIt menu function. Follow the
FaCtOry menu function. Follow the
Figure 13: Factory reset
20