BMPRO Trek3 Owner's Manual page 16

Exiting Set-Up Mode
To exit Set-Up mode or to exit from any menu function available in Set-Up mode,
repeatedly press the BACK button until the Trek3 enters the Home screen.
Alternatively, wait and the Trek3 will automatically revert to the Home screen,
saving any changes made when editing the menu functions.
Set-Up Mode Menu Functions
Table 1 lists the standard menu functions available from Set-Up mode. When in
Set-Up mode, use the up and down scroll arrows to navigate the Set-Up menu
functions.
Table 1: Trek3 Set-Up menu functions
Set time on the Trek3 display
CLOCk
Configure the water tanks
tanks
Configure the battery capacity of the battery connected to the BatteryPlus35
batCAP
Adjust low voltage warning thresholds for the low battery alarm
bataLm
Adjust the LCD backlight
baklIt
Advanced menu settings. For technical personnel only. The functions available in
advanC
the Advanced menu setting may vary with some versions of the BatteryPlus35.
Displays the solar software version, available only when solar source is present
SOLsw
Displays the solar hardware version, available only when solar source is present
SOLHw
Displays the BatteryPlus35 software version
BP35 sw
Displays the BatteryPlus35 hardware version
BP35 Hw
Displays the Trek3 software version
tr2sw
Displays the Trek3 hardware version
tr2Hw
To perform a factory reset
faCtry
If additional devices are connected and installed to the system, additional menu
functions will appear when navigating Set-Up mode.
The additional menu functions will display the CAN ID number of the installed
device, as well as the software ( ) and hardware (
sw
16
) version number.
Hw