Step 1; Step 2 - modway EEI-3045 Quick Start Manual

EEI-3045 Chair

STEP 1:

Please take t he compressed Seat Cushions (2), Back Cushions (1), all Legs and hardwares bag from the
bottom of Seat Frame (6).
Carefully remove plastic packaging of the compressed Seat Cushions (2) and Back Cushions (1).
Being carefully not to cut through to them.
Place compressed Seat Cushions (2) and Back Cushions (1) on a flat surface in a well ventilated room and
allow 48 hours for expansion.
Due to the unique properties of the compressed Seat Cushions (2) and Back Cushions (1), dimensions after
expansion will vary slightly; this is normal and will not affect the performance of your chair.
6
8

STEP 2:

Please put Sofa Frame (6) on a carpeted or padded surface.
Insert Leg (7) to the bottom of Frame (6) and tight by hand in the direction of the arrow as shown.
Repeat the same steps for the other 3 pieces of Leg (7).
6
7
7
7
7
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 2 of 5