Page 1
A S S E M B LY I N S T R U C T I O N S EEI−4894 V1.05.06.21 Questions? Contact us! 609.256.9000 • cs@modway.com www.modway.com 780−161MD1−0 PAGE 1 OF 13...
Missing parts or hardware? Need assistance? + Level Contact us before returning your item. We're here to help! + Silicone Adhesive or Caulk 609.256.9000 • cs@modway.com + Drywall Anchors and Screws + Other Wall-Mounting Hardware 780-161MD2-0 PAGE 2 OF 13...
Page 3
Wood Dowel M8 x 25mm Wood Dowel M6 x 25mm Back Panel 1 Front Support Center Panel Drawer Side R 1 Drawer Side R 2 Cam Bolt Ø6 x 24mm Right Side Panel Drawer Front 3 780-161MD3-0 PAGE 3 OF 13...
Page 4
Bearing Runner 400mm x1 Pair Screw 4 x 12mm Bearing Runner 300mm x1 Pair Center Panel Cam Lock Ø12 Drawer Front 3 Drawer Side R 1 Drawer Side R 2 Drawer Panel 2 780-161MD4-0 PAGE 4 OF 13...
Page 5
Screw 9 x 38mm Bearing Runner 400mm x1 Pair Screw 4 x 12mm Bearing Runner 300mm x1 Pair Drawer Side R 1 Drawer Side R 2 Screw 9 x 38mm Bottom Panel Front Support Support Panel Center Panel 780-161MD5-0 PAGE 5 OF 13...
Page 6
Screw 9 x 38mm Bottom Panel Back Panel 1 Back Panel 2 Cam Lock Ø15 Bottom Panel Back Panel 1 Back Panel 2 Front Support Cam Lock Ø15 Right Side Panel Bottom Panel Back Panel 1 Back Panel 2 Front Support Support Panel 780-161MD6-0 PAGE 6 OF 13...
Page 7
Screw 4 x 14mm Corner Bracket Right Side Panel Back Panel 1 Front Support Bracket L/Hanger Bracket R/Hanger Screw 4 x 28mm Right Side Panel 780-161MD7-0 PAGE 7 OF 13...
Page 8
Wall Bracket Installation Guide 14.1 Use a drill to make all pilot holes. 14.2 Insert a Drywall Anchor Measurement Guide into each of the nine holes. All units are in millimeters. 14.3 Install bracket with 3 screws. 14.4 Ensure your bracket measurements are correct Repeat with other brackets.
Page 9
NOTE: Mounting hardware and tools are not included. We suggest professional installation. 780-161MD9-0 PAGE 9 OF 13...
Screw 4 x 14mm Door Hinge (Full Overlay) Door Hinge (Half Overlay) Door Panel Right Sold separately Screw 4 x 25mm Screw 4 x 14mm Rubber Pad Door Panel Right Drawer Front 1 780-161MDA-0 PAGE 10 OF 13...
Page 11
The drawer(s) can be removed, if ever required. Locate the spring clip on both sides on the drawer glide. At the same time, press the clips and pull the drawer out. To reinsert, simply align the 2 sides of the drawer glides and slide in until fully inserted.
Page 12
Your sink basin comes complete with a silver overfl ow ring. If you'd like to remove this overfl ow ring, you can do so by hand. Missing parts or hardware? Need assistance? Contact us before returning your item. We're here to help! 609.256.9000 • cs@modway.com 780-161MDC-0 PAGE 12 OF 13...
Page 13
Clean using a non-abrasive cloth and a mild cleaner. Never use harsh chemicals, as they could damage the fi nish or integrity of the item. CONNECT WITH US! Tag us @modway_furniture and #modway for a chance to be featured. 780-161MDD-0 PAGE 13 OF 13...
Need help?
Do you have a question about the EEI-4894 and is the answer not in the manual?
Questions and answers